Brandon Burleson

Dallas Security Systems replaced the defective South Tower surface lot multi‑sensor camera with a new 20MP MEGApix Flex 4‑in‑1 multi‑sensor unit featuring four 5MP sensors and 2.8–8.0mm varifocal lenses. The team removed the old camera mount, installed the new outdoor vandal‑resistant dome and wall mount bracket, and programmed the camera before adding it to the server. We adjusted all sensors for optimal coverage and installed the required injector in the basement telecom room to complete the upgrade.

Installed an IQ4 panel along with two PG9303 contacts and one PG9945 wireless contact paired with an ODC59A. At the customer’s request, added two motion detectors—one in the shop area and one in the front office entry—using two PG9984P units.

Tested the entire system, confirmed successful signal transmission to central monitoring, and verified all devices reported correctly.

Set the customer up on Alarm.com, linked the new system with their existing home system, and provided training on both the mobile app and the keypad.

Dallas Security Systems was contacted to install a new DMP burglar alarm system  and Uniview camera over the main doors. A motion was be placed in the front office and the back warehouse office along with an alarm keypad. DSS added a wireless transmitter at each overhead door and main door and tie it into the existing contact that is in place. DSS also replaced the 3 contacts missing on 3 of the main doors.

Customer contacted DSS to install an ADC alarm system to secure their business. DSS installed alarm devices for (2) main Doors, (4) glass break detectors, and (2) motion Detectors. We insured all equipment worked properly at the end of our visit.

Customer contacted Dallas Security Systems to provide access control for (8) doors. DSS provided the access control devices for (8) doors. DSS also installed (6) new electric locks.

Customer contacted DSS to install access control for four doors. All interior and exterior cameras have been mounted and are fully operational. We also installed card readers and door contacts on the double doors once they were in place and the electric strikes were installed. Finally, we tested the entire system to confirm that all equipment is functioning properly.

Customer contacted DSS to install a new IP video Intercom system. DSS was able to add an access control system to control the garage entry single door and use the existing locking hardware. We also installed a dual function card reader. We tested the system with the client to make sure it worked properly.

Customer called in to request the installation of a DMP Alarm System. DSS added a zone expander in the new suite and programmed all existing alarm devices into the existing DMP alarm system. DSS also repaired the broken overhead door sensor. Next, we changed out the alarm keypad at the front entry to match the existing system keypad. Lastly, we programmed and tested all the devices.

Customer contacted DSS to install a new IP video intercom system. DSS installed a new IP video Intercom system designed for a commercial setting. This included (1) IP Video/Intercom stations at the entry door and (1) IP desk station. The IXG Mobile App can receive calls from intercom stations, unlock doors, and monitor doors. We replaced and reconfigured the Gateway on our network everything was working and we were able to get mobile apps to work.

Customer contacted DSS to add (2) new cameras to the hallway and parking garage. We successfully installed the (2) cameras and insured they worked properly.

Customer contacted DSS to add (14) new Digital Watchdog cameras to their business.DSS added (14) new cameras through out the facility. Two of the cameras were fisheye 360 degree cameras. Those are to be installed in the sanctuary. DSS moved (3) existing cameras to a new location per site visit. Next, we programmed the cameras to the existing camera server and trained the customer on the system. Laatly, we verified all camera views with the customer prior to completing the project.