Completed Jobs by Dallas Security Systems

March 10, 2026 | Forney, TX

DSS completed the installation and integration of CCTV and access control systems for the new parish building. One new 4K camera was installed above the main entrance to monitor the drive-through area and was successfully integrated into the existing Uniview Tec system. New cabling was run, and the camera was ...

February 24, 2026 | Richardson, TX

DSS installed three new cameras. The cameras were wired back to the PoE switch on the 3rd floor and properly connected. DSS then programmed the cameras to integrate with the customer’s existing server.

February 23, 2026 | Fort Worth, TX

Installed two new card reader access control setups and integrated them with the existing Brivo system. Replaced four outdated card readers with new devices to ensure improved reliability and compatibility. Installed a new Brivo controller in the 2nd floor IT room and interfaced it with the client-provided network infrastructure. All ...

February 23, 2026 | Garland, TX

DSS removed the existing alarm system and installed an Alarm.com panel while utilizing the current alarm devices. Three new keypads were installed to replace the old ones. All cabling was tested to confirm proper functionality and correct zone configuration.

February 20, 2026 | Allen, TX

DSS completed relocation of access control components, including card reader, magnetic lock, exit button, door contact, and associated conduit. DSS pulled back the existing composite cable toward the office and rerouted it directly to the new device location. All wiring was properly secured and terminated, and conduit was installed to ...

February 19, 2026 | Ft. Worth, TX

Dallas Security Systems provided (1) surveillance camera trailer via cellular communication at its UL Central Monitoring Station.

February 17, 2026 | Arlington, TX

Installed Brivo control panel in IT closet. Install ed black cabling from the IT closet to the back door & lobby door. Installed maglock setup on lobby door and electrified lockset on back door. Wired panel and connected to customer supplied internet connection. Programmed system and tested each door for ...

November 17, 2025 | Dallas, TX

DSS upgraded the existing Dallas server from ACC 4 to the latest Avigilon Control Center software, completing the required two‑step process from ACC 4 to ACC 5 and then to ACC 8. As part of this upgrade, all cameras were updated to the newest firmware and all eleven units were added to the ...

November 17, 2025 | Dallas, TX

Dallas Security Systems furnished and installed a Brivo access control system at the business. The system secures the front entry door and provides credentialed access using Brivo mobile credentials, building-issued Brivo cards, and existing legacy HID Prox cards.

October 2, 2025 | Dallas, TX

This project involved upgrading surveillance coverage by replacing two existing exterior bullet cameras with new 180° panoramic models and repurposing the removed cameras to improve visibility in other key areas. DSS removed the two current bullet cameras on the west and north sides of the building and installed the new panoramic ...

September 11, 2025 | Dallas, TX

Dallas Security Systems replaced the defective South Tower surface lot multi‑sensor camera with a new 20MP MEGApix Flex 4‑in‑1 multi‑sensor unit featuring four 5MP sensors and 2.8–8.0mm varifocal lenses. The team removed the old camera mount, installed the new outdoor vandal‑resistant dome and wall mount bracket, and ...

September 9, 2025 | Euless, TX

Installed a DMP alarm system consisting of one XT50 control panel with keypad, two wireless door contacts, three wireless glass break detectors, and one wireless motion detector. Mounted the control panel above the network patch panel and installed the keypad on the front of the panel.Installed wireless contacts on ...

September 8, 2025 | Dallas, TX

Installed a DMP panel with 36 wireless zones, two keypads, and one siren. Synced the customer’s other home system into the DMP app for unified control.All devices listed on the quote were installed except for two 1106W sensors. The customer confirmed that all doors and windows have been accounted ...

September 3, 2025 | Wylie, TX

We installed the new camera inside the meat cooler and ran a Cat6 cable back to the server. A new network switch was installed and all wiring was terminated. The new camera was programmed, added to the existing system, and configured for proper operation.We adjusted the camera to ensure ...

September 2, 2025 | Dallas, TX

Dallas Security Systems furnished and installed a Brivo access control system to secure the front entry door at the Dallas Parkway location. The installation included a Brivo Tri‑Tech smart reader capable of accepting Brivo mobile credentials, Brivo Smart Cards, and legacy HID Prox cards issued by the building. An ...