Completed Jobs by Dallas Security Systems

March 26, 2025 | Lewisville, TX

Customer requested current DSX system be replaced with Brivo access control system controlling the existing doors. We got rid of the old DSX 1021 cans and power supplies, installed Brivo 4 door package with lock power supply and programmed 3 doors for access control. We also tied in door ajar sensors into existing ...

March 12, 2025 | Plano, TX

Customer requested that DSS install an emergency lockdown button. We ran 22/4 wire from the panel to the office location and installed the lockdown button. We terminated the wires and programmed the button. We programmed the link to outputs. We also installed a RBSN relay and wired the relay into the ...

March 11, 2025 | Lancaster, TX

Customer reached out to DSS to repair the reader for the main car entrance gate. We urgently responded to this request as the gate was on a timer and would open automatically, posing a threat to their security. We were able to troubleshoot the issue and determined that we needed ...

March 10, 2025 | Farmers Branch, TX

Customer contacted DSS to install a DSC Neo alarm panel and one keypad. We installed the panel in the IT closet in the office space and installed the keypad in the front entry lobby area. We also installed two door contacts to cover the exterior doors. In addition, we ...

March 4, 2025 | Dallas, TX

Customer contacted DSS to replace exterior camera with the newest multi-head camera available from Avigilon. We installed new multi lens camera for south lobby entry exterior and programmed IP address and tagged camera. Next we verified recording on camera and updated views for new camera on the lobby security desk ...

February 26, 2025 | Dallas, TX

Customer contacted us to reinstall a maglock. We removed two old armatures and installed two 4854 armatures and two 301332 armature housings. We insured that the magnetic lock worked properly before leaving.

February 25, 2025 | Dallas, TX

Customer contacted us to repair two Vitek Dome cameras. When we arrived, there was no power to the existing camera. We then traced the wiring and discovered that the power source at the reception desk was cut off somewhere along the line, which resulted in no power reaching the camera. ...

February 20, 2025 | Dallas, TX

Customer requested a new card reader for their suite, so we installed a new HID compatible reader. We pulled cabling from the door over to the mechanical room where the spare ports reside. Lastly, we terminated the devices to the panel, add to the system, program and test.

February 13, 2025 | Dallas, TX

Customer requested an access control system. DSS installed a Brivo access control system on the front door. DSS provided a CR/Keypad at the door along with all other door related devices. Customer will be able to control the system by a mobile app.

February 12, 2025 | Dallas, TX

Dallas Security Systems reinstalled the printer and the client was able to give us the admin permissions so we could upgrade the software and load the workbench. DSS gave the client full permission on the printer. We also printed a few test cards with the workbench, and the client printed ...

February 8, 2025 | Lewisville, TX

Customer contacted Dallas Security because the Brivo panels were offline. We completed installing NEW ACS 6100 DB for client. We used three of them to get the doors back up and operating. We walked around the building testing each door to ensure they were working. We also fixed the DSC NEO ...

February 6, 2025 | Dallas, TX

Customer requested an access control system be installed for their main entry door. We installed card reader system for the main entry door and installed a video-intercom/interface for communication and release of the main entry door. Lastly, we installed of web-based control panel with APP.

January 31, 2025 | Dallas, TX

Customer contacted us to connect the fire panel to the DSX system. We met with the client and their fire vendor and proceeded to connect three DSX panel locations to the release relays. At the end of our visit, we ensured that the system worked properly.

January 31, 2025 | Greenville, TX

Customer contacted DSS to figure out why their alarm system failed to test. DSS met with their IT specialist. He ran some diagnostics on the network switch while we tested the cable. The cable was showing an open on one of the blue pair and one of the brown pair. ...

January 30, 2025 | Dallas, TX

Customer contacted DSS to repair their cameras. DSS was able to troubleshoot 11 cameras, discovering that the Luxul AMS-1816P POE switch was locked. We located the switch above the Tripp-Lite UPS. Lastly, we verified with the customer that all the cameras were operational and recording.