Completed Jobs by Dallas Security Systems

January 8, 2024 | Westlake, TX

Customer requested a technician come out to check on the card reader for the main door, so we ensured that the voltages were good, and the reader was working correctly. However, the customer reported that the crash bar made a noise, indicating that the hardware in the crash bar might ...

January 4, 2024 | Addison, TX

Customer contacted us because they could not connect to the DMP app on their phone. We successfully updated the panel firmware on the customer's phone (iOS) and their virtual keypad app. We had to go to a setting in “Login Security” called “Save User Code” that was essentially telling his ...

January 3, 2024 | Celina, TX

Customer contacted us to replace carbon monoxide reader. Dallas Security Systems replaced the CO2 detector on the first floor next to the stairs. While on site, we updated the panel firmware and performed all necessary system tests.

January 2, 2024 | Crossroads, TX

Upon arrival at the site, it was discovered that two zones were experiencing issues with their entrance doors. The front double door was causing problems and resulted in a broken 1106w base, which was replaced along with the cover and battery. The oil bay pedestrian door was also facing problems ...

December 21, 2023 | Westlake, TX

Install (2) new Uniview 4MP turret cameras in the classrooms and connect to existing Avigilon server. Focus and program cameras to record video & audio. One classroom already had a camera that we replaced.

December 21, 2023 | Carrollton, TX

Dallas Security Systems replaced existing DMP-XT50 panel with a new DMP-XR150 panel as there are not enough zones available to cover the entire space on the exiting panel. Installed a 16-point zone expander above exterior door and connect all existing devices and a wireless repeater in the same location. Also ...

December 20, 2023 | Sunnyvale, TX

DSS wired and installed fully functional alarm system with a DMP XR150 panel connected to all man doors, office and warehouse doors. Along with detection hardware for glass break, 360 degree motion, long range motions and long range photo beam set.

December 20, 2023 | Addison, TX

Pulled CAT6 cabling from new Avigilon 2.0C H5A D1 indoor dome camera location to POE switches. Installed new dome camera in hallway. Added camera license to the Avigilon server. Added new dome camera to ACC7 software, programmed, adjusted view and tested. Took pictures of network rack, camera view, IP ...

December 20, 2023 | Fate, TX

A Securitron entry system with access control keypad was installed at 2 entry doors. After install system was programmed, tested and customer was trained how to use the system. A month later, at the same location, DSS was hired to demo the existing control panel and reroute and run wire to ...

December 12, 2023 | Ovilla, TX

DSS ran cable and connected existing card reader and added a new Fairpointe Access mobile ready card reader. Installed mag-locks & exit button at dbl. doors. Connected all equipment to Sicunet control panel and tested.

December 11, 2023 | McKinney, TX

Our system design team customized a camera package and an access control solution. We installed within 2 days of approval. They system is up and running very smoothly

December 8, 2023 | Fort Worth, TX

Installed new pedestal box on existing pedestal.  Install new card reader/ keypad and intercoms on all 5 gate pedestals.   Programmed changes on the DSX panel per customer requirements. Tested gate reader/keypads.

December 6, 2023 | Irving, TX

DSS ran CAT5 cable to existing PoE switch and installed two (2) new Digital Watchdog MT95 5MP turret cameras to view entrance to the parking garage and one camera in the lobby area to view elevators and entry door from parking garage. Programmed cameras to the existing system and checked view.

December 5, 2023 | Cedar Hill, TX

Installed control panels and ran cabling to the shop and office access doors and installed HES-5200C failsafe/secure strike devices. Wired door into control panel. Tested doors after programming. 

December 5, 2023 | Lancaster, TX

DSS pulled CAT5 to replace the existing system with a Brivo Access Control System. Including (2) BSPMF-B Tri-tech readers & (1) BSPKF-B reader with keypad, all compatible with Brivo Mobile Pass, Alt. power supply and Wi-Fi door controllers.