Completed Jobs by Dallas Security Systems

November 27, 2023 | Richardson, TX

DSS removed old panels and wired, installed new DMP XR550 panels and cell cards. Sent signals and verified communication and user access.

November 21, 2023 | Allen, TX

Opened up a new daycare center and needed a security system with access control for employees. Upon getting the call from customer we visited the site same day and gave an estimate... we installed digital watchdog outdoor all weather cameras, DSX access control and DMP burglar alarm system.

November 15, 2023 | Wylie, TX

We replaced the headend NVR CCTV recording servers with a Digital Watchdog solution and added Digital Watchdog cameras.

August 10, 2023 | Desoto, TX

DSS ordered a new Viking E30IP EWP (intercom with enhanced weather protection) to replace old intercom that stopped working. Installed phone and connected to server, updated and tested unit.

July 31, 2023 | Grand Prairie, TX

We replaced the existing DSX modem with a Network Module at the DSX Master Panel to communicate back to DSS for monitoring services.

April 27, 2023 | Garland, TX

We installed a Qolsys All-In-One IQ Panel 4 LTE, Wi-Fi, Z Wave, Bluetooth, PowerG, and legacy security wireless with IoT processor. Connected existing hard wired devices and added 360 degree sensors. Took over monthly monitoring services also.

April 18, 2023 | Mansfield, TX

Installed Alarm system with Alarm.com services and equipment. Includes wireless motions, indoor siren, ProSeries 4MP turret cameras with memory cards and Qolsys IQ Hub.

February 14, 2023 | Jacksonville, TX

Client called in because they were having issues with their badge access system. Dallas Security Systems successfully replaced the parent and child panel. We checked the wiring and had to correct dip switches to get the system back up and running. At the end of the job, we checked to ...

February 10, 2023 | Dallas, TX

Customer contacted us to troubleshoot one of their gates that was malfunctioning. We accessed the gate controller and found that the loop detectors were unplugged at the gate motor. So, we reconnected the transformer, verified that the gate loops were working, and corrected the programming on gate down output for ...