Completed Jobs by Dallas Security Systems

December 23, 2024 | Balch Springs, TX

Customer contacted us to upgrade and replace old DVR with a Vitek DVR. We installed a Vitek DVR and verified all ten cameras were up and recording on the new DVR. We then setup the DVR in the cloud account and had the customer share the system with another user, ...

December 19, 2024 | Garland, TX

Customer contacted us to install the Lan Module at the DSX Master Panel and tie into the cellular router that we are installing. We successfully installed the LTE router and lantronix unit that had been configured to connect to the DSS Comm SVR in the phone room. Lastly, we verified ...

December 19, 2024 | Richardson, TX

Customer contacted DSS to reinstall two motion detectors. We remounted two Bosch 360-degree motion detectors and tested them to make sure they functioned properly.

December 14, 2024 | Frisco, TX

Customer requested that we replace their old laptop computer and monitor with 4k viewing capabilities. We successfully installed DW software and moved over cameras and license to the new computer. We also verified that the cameras, recordings and licenses were there.

December 12, 2024 | Dallas, TX

Client called in needing glass break detectors, so we installed sixteen wireless glass breaks, four wireless sirens and one repeater to system. All system checks are good, communications and devices are communicating with panel.

December 11, 2024 | Dallas, TX

DSS was contacted to fix a couple of photo beams that were knocked off. We installed two photo beam transmitters and completed a full system test for building.

December 11, 2024 | Irving, TX

Customer reached out to us to add a HID badge reader to their facility. They wanted to add a reader 20ft down the hall from the door so they can swipe before they reach the door. This will involve wiring the new reader to the existing one. We installed a ...

December 10, 2024 | Frisco, TX

Customer contacted us to install a 180-degree view camera. We successfully ran a Cat6 cable from the first floor to second floor, programmed camera, verified motion recording and tagged camera cable. We contacted DW to do a manual activation for camera license and activated licensing.

November 22, 2024 | Dallas, TX

The client requested a battery change and window sensors for their new windows. We successfully replaced the battery.

November 20, 2024 | Burleson, TX

Customer had us come out to repair a strike that keeps burning out latch assemblies. We successfully resolved the issue by verifying that the strike was receiving the correct amperage at 0.25 mA and the proper DC voltage at 24.7 VDC. We installed a new HES 9600 strike and placed a warranty sticker ...

November 20, 2024 | Celina, TX

Dallas Security Systems was asked to provide and drop off (1) 20' Mobile Solar Surveillance Trailer to monitor the surrounding area of their job site. We also provided a mobile app with the trailer, making sure it functioned correctly, and that the client was comfortable using it.

November 19, 2024 | Dallas, TX

Customer called in because their intercom was not working. We checked the call box at the front door and found the unit was dead then checked the file room and found the rack was dead. Next, we found the 110 plug at the wall and verified the power was good. Finally, ...

November 14, 2024 | Fort Worth, TX

DSS was contacted to drop off and set up a Mobile Surveillance Trailer to monitor the client's business. We ensured trailer was dropped off and set up properly.

October 11, 2024 | Plano, TX

DSS installed a DMP XT50 Intrusion Detection Panel in the IT room and connected it to the network as well as installed door contacts at the two front doors. The existing warehouse alarm devices were tested and connected to the panel with wireless transmitters. Any devices that weren't working were ...

October 7, 2024 | Dallas, TX

Customer wanted to move DSX and camera software to new machine. We successfully backed up the DSX, version 3.9.3 files and installed new DSX software onto the new virtual com server. Converted the database and verified the data was good, keyed the software to the new server and backed up the ...