February 26, 2025 | Dallas, TX
Customer contacted us to reinstall a maglock. We removed two old armatures and installed two 4854 armatures and two 301332 armature housings. We insured that the magnetic lock worked properly before leaving.
February 25, 2025 | Dallas, TX
Customer contacted us to repair two Vitek Dome cameras. When we arrived, there was no power to the existing camera. We then traced the wiring and discovered that the power source at the reception desk was cut off somewhere along the line, which resulted in no power reaching the camera. ...
February 20, 2025 | Dallas, TX
Customer requested a new card reader for their suite, so we installed a new HID compatible reader. We pulled cabling from the door over to the mechanical room where the spare ports reside. Lastly, we terminated the devices to the panel, add to the system, program and test.
February 13, 2025 | Dallas, TX
Customer requested an access control system. DSS installed a Brivo access control system on the front door. DSS provided a CR/Keypad at the door along with all other door related devices. Customer will be able to control the system by a mobile app.
February 12, 2025 | Dallas, TX
Dallas Security Systems reinstalled the printer and the client was able to give us the admin permissions so we could upgrade the software and load the workbench. DSS gave the client full permission on the printer. We also printed a few test cards with the workbench, and the client printed ...
February 8, 2025 | Lewisville, TX
Customer contacted Dallas Security because the Brivo panels were offline. We completed installing NEW ACS 6100 DB for client. We used three of them to get the doors back up and operating. We walked around the building testing each door to ensure they were working. We also fixed the DSC NEO ...
February 6, 2025 | Dallas, TX
Customer requested an access control system be installed for their main entry door. We installed card reader system for the main entry door and installed a video-intercom/interface for communication and release of the main entry door. Lastly, we installed of web-based control panel with APP.
January 31, 2025 | Dallas, TX
Customer contacted us to connect the fire panel to the DSX system. We met with the client and their fire vendor and proceeded to connect three DSX panel locations to the release relays. At the end of our visit, we ensured that the system worked properly.
January 31, 2025 | Greenville, TX
Customer contacted DSS to figure out why their alarm system failed to test. DSS met with their IT specialist. He ran some diagnostics on the network switch while we tested the cable. The cable was showing an open on one of the blue pair and one of the brown pair. ...
January 30, 2025 | Dallas, TX
Customer contacted DSS to repair their cameras. DSS was able to troubleshoot 11 cameras, discovering that the Luxul AMS-1816P POE switch was locked. We located the switch above the Tripp-Lite UPS. Lastly, we verified with the customer that all the cameras were operational and recording.
January 30, 2025 | Dallas, TX
Customer called DSS because their motion detector was not releasing the door. While we were there, we also discovered the intercom was unplugged so we plugged it up. To repair the motion detector, we programmed the exit request in the DSX system and verified the doors were working.
January 29, 2025 | Dallas, TX
Customer contacted DSS because they were experiencing issues with the DSX controller located on the elevator. The elevator controller kept going into communication loss. We replaced the DSX 1043 panel with a new panel and verified the elevators were working. We also replaced two batteries in the DSX panels located in ...
January 27, 2025 | Mckinney, TX
Client reached out to DSS to repair six card readers on the third floor. We found the outlet was not supplying power. With help from the facilities manager, the breaker was identified and reset. Next, we verified power was on and a download was initiated. Lastly, we replaced the backup ...
January 23, 2025 | Dallas, TX
Customer needed to get the cameras from PC4 viewable from the main office. We located the Avigilon server in the 3rd floor server room in PC4 and added new users to the system. I verified that Kelly could access the PC4 cameras from her desk.
January 17, 2025 | Dallas, TX
Customer wanted DSS to add an intercom as well a door station. DSS installed one answering station with audio and video. DSS also installed a wall mount adapter for the main entry intercom. Lastly, we installed the wedge on the front door unit. As always, we tested the unit to ...
Total: 120